To make a feeling of luxurious silk or artist wallpaper “faux dragging” can be applied on almost all adequately smooth and prepared surfaces. Whilst it is an easier than you think technique to actually learn celebrate enormous benefits to the general painting and decorating project as the finishes are luxurious and stunning. painting and decorating dublin
A wide blend of different glazes and latex paints can be used to create the “faux dragging” effect but we would always suggest using an oil structured paint or glaze as it will provide a more leeway in conditions of trying to manipulate it into the requisite styles as non-oil based ones can dry extremely quickly. This best thing about this technique is not only does it work on walls and ceiling but it can certainly be applied to most types of woodwork and furniture.
The effect is created when a dry wash is pulled by using a coloured glaze. In doing hence the base coloring is revealed in very fine lines, which make the wall’s seem like man made fibre fabric. Dragging is quite effective in soft colors such as pastels, over the white base coat. You may also use a cream or off-white base with color or taupe colours to make a “vintage” look.
So here are definitely the steps you need to take to perform “faux dragging”:
Apply the two jackets of a latex foundation coat (white or off-white). After painting both jackets, area wall dry for at least two several hours.
Mix satin latex car paint with latex glazing water in line with the instructions n the package of the double glazed liquid.
Apply the colored glaze to a controllable length of surface.
Via one end and take a 4″ dragging wash (or any long bristled brush) through the rainy glaze. You can also perform this technique by using a dry rag. Repeat several times to get the desired effect. Keep your hand as steady as you can as you drag.
Also note that if you are actually working with the entire elevation of a wall from ceiling to base panel, you can use a very wide brush, such as a wallpaper clean or even the extensive end of the broom.
Do it again steps 3 & 4 on another area. Clean the dragging brush on a rag before hauling the next area.