My Info Blog

Hockey Sticks, History and Evolution

Dance shoes sticks have evolved significantly from the early days and nights of the overall game. These first sticks were hand created in one piece by the Nova Scotia Mi’kmaq people from the Hornbeam or “Ironwood” tree. After, as the Hornbeam shares were depleted, the Mi’kmaq turned to yellow birch or ash to produce their hockey sticks as these hardwoods have similar characteristics to the Hornbeam. EASTON SYNERGY GX stick

By the 1920’s supports were crafted almost specifically from ash. Although durable they were very heavy and cumbersome. The first major innovation in the manufacture of hockey supports didn’t come about until the 40’s when the laminated stick was made. Fiber glass was added to the lamination process in the 1960’s thus greatly bettering the overall flexibility and toughness of the sticks. Producers started out to experiment with metal alloys in the 1980’s and produced light weight aluminum sticks constructed in one piece. These proved to be unpopular with players because they lacked the necessary “feel”. This issue was solved by adding a wood made blade to the lightweight aluminum shaft. Today, wooden and aluminum sticks are being replaced by much lighter weight but far more expensive composites such as fiberglass doors and graphite or carbon dioxide fiber. Titanium and Para-aramid synthetic fiber are also being used. These composite sticks can cost more than one hundred dollar. 00 while the wood made varieties are in the $40. 00 range.

Handbags players in the 50s and 60’s learned that the greater curved the stay blade, the more irregular the shot. They would “soak” the blade of the stick to cause them to become more flexible and then impart a bend as severe as 3″. These kinds of extreme curves did, however limit the player’s capability to deal with the puck and made accurate passing more difficult. Today’s sticks are legally limited to a curve of no more than 3/4 of an inch. The location of the curve also is important – a heel curve is generally preferred by the defencemen because it provides for a harder slap shot while forwards will usually prefer a toe curve as it allows for more accurate wrist shots and better stick handling.

The length of the dance shoes stick will be identified by how big the players themselves. Actual size constraints for both regular supports and goalie sticks are found in the handbags rulebook. The angle of the blade to the shaft called the “lie” is also determined by the type and stance of the participant. The higher the “lie” the more attractive the stick will stand. Another variable is the angle of the eye of the blade itself. The greater the angle, the larger the trajectory of the shot. Flex is another deciding factor in the choice of a stay. Defencemen might choose a stiffer stick while transfer will prefer a more flexible stick. Sticks are also made as either left or right passed.

Players love to apply tape to their twigs both to increase the durability and the playability. Initially a “knob” is created near the top of the stick to increase the grip while roller skating, passing and shooting. This kind of also causes it to be much easier to choose the stick off of the ice cubes if it has recently been dropped or knocked away. The blade of the stick is also documented allowing for more “cushioning” when passing and better friction when shooting.

To get young hockey players the biggest mistake they can make is choosing a stick that is either too short or very long. To determine the proper length the participant must stand upright in their skates. With the bottom of the blade on the ice and the shaft of the stay coming straight up the body, the top of the stick should come to shoulder height or maybe the centre of the top of the chest. A stick too long will impair both skating and stick handling and one too short will bring about weaker shots.

Leave a Reply

Your email address will not be published. Required fields are marked *